Welcome to BYTE TCM
Standard components for die press
BYTE group is a well-known supplier famous for its self-lubricating sliding elements, which are widely used in automotive stamping dies. Among them, the most popular product is the cam unit.
Cam unit are used for pierce, trim and flange of plates.
We strive for excellence in everything we do.
Apart from our standard products, we also provide customized cam units.
Professional engineer
Stable quality
Cam Units | Catalog 2022.00
What's New？
Before, the tolerance from the datum plane to the pin hole is +-0.05
Now, the tolerance from the datum plane to the pin hole is +-0.03
Die Mounted Cam Unit
Special offer 20%OFF B-SKC 52-00-25
USD $72.00
B-SKC / B-SKCA series is low-cost cam unit for medium/light drilling and flanging with high rigidity with Box.
They have the range of working surface width from 50 to 600mm, working forces from 14.7 to 137.2kN, spring return type of coil spring.
Aerial Cam Unit
Special offer 20%OFF
USD $160.00
B-SUCD series is low-cost cam unit for medium/light drilling, not suitable for flanging.
They have the range of working surface width of 52mm, working forces of 14.7kN, spring return type of coil spring only.
Aerial Cam Unit
Special offer 20%OFF
USD $176.00
B-SACD series is low-cost cam unit for medium drilling and higher retraction force, not suitable for flanging.
They have the range of working surface width of 52mm, working forces of 29.4kN, spring return type of coil spring only.
Aerial Cam Unit
B-C series is particularly suitable for compact die. keeping the same size, enables the 3 kinds of working force.
They have the range of working surface width from 46 to 140mm, working stroke of short and long type, working forces from 14.7 to 127.4kN, spring return type of coil spring and gas spring.
Aerial Cam Unit
B-SULNC series is elongated Cam unit for light drilling, not suitable for flanging.
They have the range of working surface width of 65mm, working forces of 14.7kN, spring return type of coil spring only.
Cam unit slider – Processing
Customized solutions to fit your requirements
This eliminates the need for additional work on the cam slider…
FCA | Catalog 2021.00
Standard parts for die
- Die – Panel Stamps : Production Lot / Trademark / Bottoming Marker
- Guiding; Pin and Bronze Alloy Bushing for Pads & Shoes (DIN 9833 Specifications)
- Guiding; Pin and Bronze Alloy Bushing for Generic Uses (DIN9833 Specifications)
- Pad Balancers, Die Locating, Die Stop Blocks
- Wear Plates and Wear Components (VDI 3357 Specifications)
Overwhelming trust
GM, Ford, FCA, TOYOTA, Nissan, etc…
Short lead times
Competitive pricing
Customized service
Standard Components for press die
Marketing
FAQ
about Cam
BYTE cam units can be used interchangeably with cams from other brands?
After the code name is converted, it can be used interchangeably.
Is it possible to drill holes for retainer mounting according to the processing instructions?
Yes, we can drill Tapped Hole and Dowel Pin Hole for retainer mounting.
Can the pressure source of the cam be changed to a gas spring?
Yes, it can be replaced with a nitrogen gas spring through non-standard customization.
Standard Components for press die
Get In Touch
Request Quote
TEL: +886-8-7521268
Address：5 Jingjian Rd, Pingtung City, Taiwan 90093
Email：info@bytetcm.com
MON-FRI 08:00 - 17:00
Welcome to BYTE
BYTE group is famous supplier of self- lubricating sliding elements which are mainly used in stamping dies for the automotive.
Cam unit are used for pierce, trim and flange of plates.
The Target
To full fill the customer’s keep the cost down, we continue to reduce “wastefulness”, “non-uniformity” and “unreasonableness” in our work.
For special requests are needed we can offer customizations and special cam solutions.
Our server
In addition to our standard product portfolio, we are pleased to offer customized cam units.
To enable you to quickly for mounting the elements on the slider, we can drill tapped hole, dowel pin hole, keyway, groove, etc on the working surface according to your data.
So You don't need
- Dismantling
- Machining
- cleaning
- Assembly
For information and inquiries, simply send an email to us.
What is Guide Components?
It is a part that plays a guiding role in the mold. Mainly include guide plate, guide post, guide sleeve, etc.
Used for guides with large lateral forces. Such as the guide of the upper and lower molds of the mold, the guide and the convex and concave of the press.
Whta is Locating Components for Automobile Dies?
Positioning parts refer to parts that can fix the position of the mold and production parts.
Include: Panel Input Detectors, Limit Units, guide plate, positioning pin, key, guide pin, etc.
What is Springs?
For machine tools, it can only produce a lot of force. It is mainly used to complete the action of the mold. When the parts in the mold require less force, a springs is needed to generate force to complete the action.
Include: Coil Springs, Gas Springs, Urethane Springs, Tension Spring, etc.
What is Take and release Components?
It is a set of Components that can help need to take out the workpiece or process parts after the die is stamped.
What is Limit Units?
Limiting Units are mainly divided into elastic limit and rigid limit, as well as the limit of moving units.
What is Lifting tools?
Lifting tools is a product used to grab and lift goods. Each Lifting tools has a different method of use and scope.
What is Peripherals Components?
It is some parts of the mold in use.
Include: Coil Support, Guide Roller Set, Panel Input Detector, Side Gauge, Sub Lifter
Which brands are on sale Standard Components for press die?
Misumi, Sankyo, Oiles, Fibro, also BYTETCM
Which brands are production Cam units for press die?
Sankyo, Oiles, Omcr, Voestalpine, also BYTETCM
English